Freescale公司的MC9S08LL16是8位段LCD微控制器,高達20MHz的CPU,工作電壓3.6V-1.8V,工作溫度-40℃到85℃.MC9S08LL16支持多達32個中斷源/重置源,主要用在手提醫(yī)療設備,個人診斷,以電池為能源的設備,低端計量表,帶顯示的ZigBee節(jié)點,小型家電等.本文介紹MC9S08LL16主要特性,方框圖以及演示板DEMO9S08LL16主要特性和詳細電路圖.S08LL8-bitsegmentLCDmicrocontrollerfamilyisidealforbattery-poweredapplicationssuchasmedicaldiagnostic
Freescale 公司的MC9S08LL
16是8位段
LCD微控制器,高達20MHz的
CPU,工作電壓3.6V-1.8V,工作溫度-
40℃到85℃. MC9S08LL16支持多達32個中斷源/重置源,主要用在手提醫(yī)療設備,個人診斷,以
電池為能源的設備,低端計量表,帶顯示的ZigBee節(jié)點,小型家電等.本文介紹MC9S08LL16主要特性,方框圖以及演示板DEMO9S08LL16主要特性和詳細電路圖.
S08LL 8-bit segment LCD microc
ontroller family is ideal for battery-
powered applicat
ions such
asmedical diagnost
icsor handheld appliances. The S08LL family extends battery life with industry leading low-power technology, eases development time and eliminates any excess cost with its complete Tower ecosystem.
MC9S08LL16主要特性:
• 8-Bit HCS08 Central Processor Unit (CPU)
– Up to 20-MHz CPU at 3.6V to 1.8V across temperature range of -40℃ to 85℃
– HC08 instruction
setwith added BGND instruction
– Support for up to 32 interrupt/reset sources
• On-Chip Memory
– Dual Array FLASH read/program/erase over full operating voltage and temperature
– Random-access memory (RAM)
– Security circuitry to prevent unauthorized access to RAM and FLASH contents
• Power-Saving Modes
– Two low power stop modes
– Reduced power wait mode
– Low power run and wait modes allow peripherals to run while voltage
regulator is in standby
– Peripheral clock gating register can disable clocks to unused modules, thereby reducing currents.
– Very low power external o
scillator that can be used in stop2 or stop3 modes to provide accurate clock source to real time counter
– 6 usec typical wake up time from stop3 mode
• Clock Source Options
– Oscillator (XOSC) — Loop-control Pierce oscillator; Crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
– Internal Clock Source (ICS) — Internal clock source module containing a frequency-locked-loop (FLL) control
ledby internal or external reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supports bus frequencies from 1MHz to 10 MHz.
