AvagoAFCT-701SDDZ10GBE/1GBE以太網1310nmSFP+光收發器,功耗為850mW,具有完全數字診斷管理接口,光學接口為IEEE802.3ae10GBASE-LR,工作速率1.25GBd,主要用于吉比特以太網.本文介紹AFCT-701SDDZ主要特性,功能方框圖以及典型應用配置圖.AFCT-701SDDZ:10Gb/1GbEthernet,1310nmSFP+TransceiverTheAvagoAFCT-701SDDZtransceiverispartofafamilyofSFP+products.ThistransceiverutilizesAvago’s1310nmDFBandPINDetectortechnologytop
Avago AFCT-
701SDDZ
10GBE/1GBE以太網
1310nm
SFP+光收發器,功耗為850mW,具有完全數字診斷管理接口,光學接口為IEEE 802.3
ae10GB
ASE-
LR,工作速率1.25GBd,主要用于吉比特以太網.本文介紹AFCT-701SDDZ主要特性,功能方框圖以及典型應用配置圖.
AFCT-701SDDZ :10Gb/1Gb Ethernet, 1310nm SFP+ Transceiver The Avago AFCT-701SDDZ transceiver is part of a family of SFP+ products. This transceiver utilizes Avago’s 1310nm DFB and PIN Detector technology to provide an IEEE 10Gb Ethernet design compliant with the 10GBASELR standard and allows for the o
perati
onat 1.25GBd for Gigabit Ethernet Applications. The AFCT-701SDDZ transceiver has the signal and the chassis SFP grounds tied together to enhance the EMI shielding performance of the module, providing extra margin that is particularly useful in higher density applications. The design is based on the new electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF Committee. These specifications are referred to as SFP+ to recognize these enhancements to previous SFP specifications used for lower speed products.
Avago Technologies is an active participant in the SFF Committee specification development activities.
AFCT-701SDDZ 主要特性:
Avago 1310nm Distributed Feedback (DFB) source and Transmitter Optical Subassembly technology
Avago PIN detector and Receiver Optical Subassembly technology
Typical power dissipation 850mW
Full digital diagnostic management interface
Avago SFP+ package design enables equipment EMI performance in high port density applications with margin to Class B limits
Flexibility in data rate selection through either hardware or software control Specifications
Optical interface specifications per IEEE 802.3ae 10GBASE-LR
Compliant to the transmitter extinction ratio and the receiver sensitivity specs per IEEE 802.3 Gigabit Ethernet (1.25GBd) 1000BASE-LX
Electrical interface specifications per SFF Committee SFF 8431 Specifications for Enhanced 8.5 and 10 Gigabit Small Form Factor Pluggable Module “SFP+”
Management interface specifications per SFF Committee SFF 8431 and SFF 8472 Diagnostic Monitoring Interface for Optical Transceivers
Mechanical specifications per SFF Committee SFF 8432 Improved Pluggable Formfactor “
IPF”
